Easy 3D mural for all

MDH board -6mm thickness got from a plywood shop. Cut into 1. 5 *1. 5. 

(You can ask the shoper to cut it for you or you can cut it yourself using a hand saw)

Fevicol

POP

Ceramic

Acrylic paints

POP and ceramic can be bought from hardware shop.

If you like my post, please like and share my page.

Good day!

Make a paste with1:1 ratio of fevicol and pop. Apply it on the mdf board.

Use a butter knife to even it.

Make an airdry clay using ceramic and fevicol in 1:1 ratio. Roll it out and stick it in the border.

Dust some baby powder on the workspace.

Now roll out the ceramic clay into long cylinders on the dusted workspace

roll it from top to bottom using your fingers

Do a plait with ceramic cylinder

Cut the plait to form a smaller border

make a small inner box.

Apply a second coat of pop mixer inside the plaited border

Even it out using the butter knife.

Roll the ceramic clay on the dusted area to form an egg shape.

Press it evenly to make a leaf like shape

Place it in the center. This is the tummy of Ganesha and other leads for hands and legs shall be place according to this

make a face by making an oval first and then rolling out to from a trunk.

take two small balls and make ears..

make cylinders of clay and make legs.

Make small balls out of the ceramic clay.

Make impressions using pen or back side of the paint brush

Paint black acrylic color

colour them as per your wish..